ORICO 40Gbps Dual-Bay NVMe Cloner or ORICO Dual-Bay M.2 NVMe Cloner? Which ORICO Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
We compare the orico 40gbps m 2 nvme hard vs m 2 nvme docking station to help you choose the right dual-bay cloner. Both devices offer one-button offline cloning for M-Key NVMe drives in standard sizes. The main difference lies in their connection speeds and thermal management. One uses a high-speed USB4 interface for rapid transfers, while the other relies on USB 3.2 Gen2 for broader compatibility. Your choice depends on whether you prioritize raw speed or compact portability.
Key differences
| Aspect | ORICO 40Gbps Dual-Bay NVMe Cloner Dock | ORICO Dual-Bay M.2 NVMe Cloner Dock |
|---|---|---|
| Interface Speed | 40Gbps (USB4/Thunderbolt 4) | 10Gbps (USB 3.2 Gen2) |
| Maximum Capacity | 16TB | 8TB |
| Cooling System | Dual aluminum heatsinks, cooling fan, full aluminum chassis | Aluminum body, thermal silicone pads |
| Physical Design | Vertical stand with non-slip pads | Lying-flat design, compact size |
| Host Connection | USB-C | USB-A and USB-C |
Which one should you choose?
Choose ORICO 40Gbps Dual-Bay NVMe Cloner Dock if
- You need the fastest possible cloning speeds for large 1TB+ drives.
- You want a device with active cooling to manage heat during heavy use.
- You primarily use USB-C ports on modern laptops or desktops.
Choose ORICO Dual-Bay M.2 NVMe Cloner Dock if
- You need to connect to devices with only USB-A ports.
- You prefer a compact, lying-flat form factor for easy storage.
- You are cloning smaller drives where 10Gbps speed is sufficient.
Verdict: Choose the 40Gbps model if you require maximum transfer speeds and robust thermal management for large datasets. The 10Gbps model is better if you need USB-A connectivity or a smaller footprint for portable use. Both handle offline cloning effectively for standard NVMe drives.
Speed, Cooling, and Capacity Comparison
Transfer speed
The ORICO 40Gbps Dual-Bay NVMe Cloner Dock uses a USB4.0 interface with Thunderbolt 4 compatibility. It delivers transfer speeds up to 40Gbps. The manufacturer states this allows 3GB files to transfer in one second. The ORICO Dual-Bay M.2 NVMe Cloner Dock relies on USB 3.2 Gen2. Its maximum speed is 10Gbps. This creates a significant performance gap. You will see much faster cloning and data movement with the 40Gbps model. The 10Gbps dock is adequate for general backups but lacks the throughput for heavy workflows.
Maximum capacity
Storage limits differ between the two docks. The ORICO 40Gbps Dual-Bay NVMe Cloner Dock supports drives up to 16TB. This allows you to use two large 8TB NVMe SSDs. The ORICO Dual-Bay M.2 NVMe Cloner Dock supports up to 8TB total capacity. This limits you to two 4TB drives. If you need to duplicate high-capacity drives, the 40Gbps model is the only option. The 10Gbps dock is sufficient for smaller drives but offers less headroom for future expansion.
Cooling system
Thermal management is critical for sustained NVMe performance. The ORICO 40Gbps Dual-Bay NVMe Cloner Dock features a dual independent cooling system. It includes two separated aluminum alloy heatsinks with thermal silicone pads. A built-in cooling fan with a dual-ventilation design is also present. The ORICO Dual-Bay M.2 NVMe Cloner Dock uses a metal aluminum chassis. It includes two thermally conductive silicone pads but lacks an active fan. The active cooling on the 40Gbps model provides better thermal control during long cloning sessions.
Physical dimensions
Size affects portability and desk space. The ORICO Dual-Bay M.2 NVMe Cloner Dock is described as approximately half the size of an iPhone. It features a lying-flat design for easy assembly. The ORICO 40Gbps Dual-Bay NVMe Cloner Dock has specific dimensions of 2.91 inches in width, 1.38 inches in height, and 5.71 inches in length. While still compact, it is larger than the 10Gbps model. If you prioritize a minimal footprint, the smaller 10Gbps dock is more suitable.
Interface compatibility
Both docks support M-Key NVMe PCIe SSDs in standard sizes including 2230, 2242, 2260, 2280, and 22110. Neither supports SATA or mSATA interfaces. The ORICO 40Gbps Dual-Bay NVMe Cloner Dock connects via USB-C. The ORICO Dual-Bay M.2 NVMe Cloner Dock also uses USB-C but includes a C to A cable. It supports speeds up to 500MB/s when connected to USB-A ports. This offers more connection flexibility for older computers lacking USB-C ports.
Which ORICO NVMe Cloner Fits Your Needs
Users needing maximum transfer speed
This model uses a USB4.0 interface with Thunderbolt 4 compatibility to deliver 40Gbps transfer speeds. You can move 3GB files in one second. It is 15 times faster than SATA duplicators. If you clone large amounts of data frequently, this higher bandwidth reduces your waiting time significantly compared to slower interfaces.
Users prioritizing high storage capacity
This dock supports NVMe SSDs with a maximum capacity of 16TB. The competitor model tops out at 8TB. If you work with large files or need to duplicate high-capacity drives, this 16TB limit gives you more flexibility. Both models accept M-Key NVMe drives in standard sizes like 2280.
Users wanting a compact portable design
This device features a lying-flat design and is approximately half the size of an iPhone. It is easy to carry and expand your storage capacity on the go. The aluminum chassis provides stability with non-slip pads. This compact form factor makes it ideal for users who value portability and space-saving efficiency.
The products compared
ORICO 40Gbps Dual-Bay NVMe Cloner Dock
Best for: Fast NVMe SSD duplication without a PC
- Transfer Speed
- 40Gbps
- Supported Drive Types
- M-Key NVMe
- Bay Count
- 2
- Offline Cloning
- One-button offline cloning
- Supported M.2 Sizes
- 2230, 2242, 2260, 2280, 22110
- Maximum Capacity
- 16TB
View on Amazon: ORICO 40Gbps Dual-Bay NVMe Cloner Dock Affiliate link
This ORICO dock clones NVMe SSDs without a PC. It uses a USB-C interface with 40Gbps bandwidth for fast transfers. You get one-button offline cloning. The dual-bay design handles two drives at once. It supports M-Key NVMe SSDs up to 16TB. The aluminum chassis includes a cooling fan. It suits users who need to duplicate drives quickly.
Pros
- 40Gbps USB-C interface for high-speed data transfer
- One-button offline cloning without a computer
- Dual-bay design for cloning two drives simultaneously
- Active cooling with fan and aluminum heatsinks
Cons
- Bandwidth is shared when using both bays
- Target disk must be larger than source disk
- Heatsinks are not standalone enclosures
Good fit if
- You need to clone NVMe SSDs without a PC
- You require fast transfer speeds for large files
- You manage multiple M.2 drives regularly
Skip if
- You need to clone SATA drives
- You want a standalone drive enclosure
- You need bandwidth dedicated to each bay
Verdict: ORICO 40Gbps Dual-Bay NVMe Cloner offers rapid one-button cloning for NVMe drives. It fits users who duplicate large data sets frequently.
ORICO Dual-Bay M.2 NVMe Cloner Dock
Best for: Offline cloning of multiple M-Key NVMe drives
- Transfer Speed
- 10Gbps
- Supported Drive Types
- M-Key NVMe PCIe SSD
- Bay Count
- 2
- Offline Cloning
- One-key clone
- Supported M.2 Sizes
- 2230, 2242, 2260, 2280, 22110
- Maximum Capacity
- 8TB
View on Amazon: ORICO Dual-Bay M.2 NVMe Cloner Dock Affiliate link
This ORICO dual-bay docking station supports one-key offline cloning for M-Key NVMe PCIe SSDs. It handles formats up to 22110 and capacities up to 8TB. The aluminum enclosure connects via USB 3.2 Gen2 for 10Gbps transfer speeds. It requires no drivers or PC for duplication tasks. The tool-free design allows easy installation of drives. It suits users needing rapid, standalone backups for multiple NVMe drives.
Pros
- One-key offline cloning without a PC
- Supports M-Key NVMe PCIe SSDs up to 8TB
- USB 3.2 Gen2 interface with 10Gbps speed
- Tool-free aluminum enclosure with sleep mode
- Compatible with Windows, Mac, and Linux
Cons
- Does not support SATA or mSATA SSDs
- Target disk must be larger than source
- Only includes silicone buckles and pads
Good fit if
- You need to clone NVMe drives without a computer
- You use M-Key NVMe PCIe SSDs in various sizes
- You want a tool-free setup for quick backups
Skip if
- You require support for SATA or mSATA drives
- You need to clone a target disk smaller than the source
- You prefer a docking station with software control
Verdict: ORICO Dual-Bay NVMe Cloner offers a straightforward, tool-free solution for duplicating M-Key NVMe drives. It fits users who need reliable offline backups for multiple SSDs without connecting to a host computer.
Specifications side by side
| Spec | ORICO 40Gbps Dual-Bay NVMe Cloner Dock | ORICO Dual-Bay M.2 NVMe Cloner Dock |
|---|---|---|
| Transfer Speed | 40Gbps | 10Gbps |
| Supported Drive Types | M-Key NVMe | M-Key NVMe PCIe SSD |
| Bay Count | 2 | 2 |
| Offline Cloning | One-button offline cloning | One-key clone |
| Supported M.2 Sizes | 2230, 2242, 2260, 2280, 22110 | 2230, 2242, 2260, 2280, 22110 |
| Maximum Capacity | 16TB | 8TB |
| Cooling Type | Aluminum heatsinks, cooling fan | not stated |
| Interface | NVMe | NVMe |
| Form Factor | M.2 2280 | M.2 |
| Features | Offline Clone | Tool-Free, Offline Clone |
| Material | not stated | Aluminum |
| Host Interface | USB-C | not stated |
| Dimensions | 5.71 × 2.91 × 1.38 inches | not stated |
| Size | IT28N | not stated |
| Color | Silver | Cool Gray |
| Model | IT28N-C | M2P2-C3 |
Frequently asked questions
Does the ORICO 40Gbps cloner support SATA SSDs?
No, this device is designed strictly for NVMe drives. The specifications list the interface as NVMe and the form factor as M.2 2280. It does not include support for the older SATA protocol or mSATA formats. You must use NVMe SSDs for this dock to function correctly.
Can I clone drives without turning on a computer?
Yes, both models support offline cloning. You can duplicate data by pressing a physical button on the device. This process does not require a host computer or software installation. The drives connect directly to the dock, which handles the data transfer independently.
What is the maximum size of NVMe drive these docks accept?
The ORICO 40Gbps model explicitly supports the M.2 2280 form factor. The second model supports M.2 drives generally, which typically includes the 2280 size. You should verify your specific drive length matches these standards before purchasing. Smaller sizes like 2242 may not fit in the dual-bay slots.
Does the faster model generate more heat?
The ORICO 40Gbps dock has a silver aluminum casing, which helps with heat dissipation. The second model also features an aluminum material for its body. Both designs use metal to manage thermal output during high-speed transfers. Proper airflow around the device is still recommended for sustained use.
Is the setup process complicated for beginners?
The setup is straightforward and requires no tools. You simply insert your source and target NVMe drives into the dual bays. Then, you press the clone button to start the process. There is no software to install on your computer. The offline nature makes it easy to use anywhere.
Do I need to install drivers for these cloners?
No drivers are required for the cloning function. Since the process is offline, the device operates independently of your operating system. You do not need to connect the dock to a PC via USB for the duplication task. The hardware handles the synchronization directly between the two SSDs.
Can I use this for backups instead of cloning?
Yes, you can use these docks for backup purposes. The offline clone feature allows you to duplicate the contents of one drive to another. This creates an identical copy, which serves as a reliable backup. You can swap drives regularly to maintain current copies of your data.