Fanxiang vs Fikwot: Nvme SSDs Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This fanxiang vs fikwot nvme SSD comparison focuses on two 2.5-inch SATA drives. Both use 3D NAND TLC memory for improved durability. They target laptops and desktops with SATA III 6Gb/s interfaces. The main difference lies in their transfer speeds. The Fikwot FS810 offers higher sequential read rates, while the Fanxiang S101 lists explicit write speeds. You should choose based on which performance metric matters more for your specific workload.
Key differences
| Aspect | Fanxiang 1TB 2.5-Inch SATA TLC SSD | Fikwot 1TB TLC SATA III SSD |
|---|---|---|
| Max Read Speed | 520 MB/s | 560 MB/s |
| Max Write Speed | 520 MB/s | not listed |
| Model | S101 | FS810 |
| NAND Type | 3D NAND TLC | 3D NAND TLC |
Which one should you choose?
Choose Fanxiang 1TB 2.5-Inch SATA TLC SSD if
- You need a published maximum write speed of 520 MB/s for consistent data transfers.
- You prefer the Fanxiang S101 model with a straightforward 520 MB/s bidirectional speed profile.
Choose Fikwot 1TB TLC SATA III SSD if
- You prioritize the higher maximum sequential read speed of 560 MB/s for faster application loading.
- You want a drive that emphasizes read performance for system responsiveness.
Verdict: The Fikwot FS810 is the better choice if you need the fastest possible read speeds for booting and loading apps. The Fanxiang S101 is suitable if you want a drive with clearly stated write speeds that match its read performance. Both offer reliable 3D NAND TLC storage for everyday computing tasks.
Fanxiang vs Fikwot: Specs Compared
Transfer Speed
The Fikwot FS810 leads in maximum read performance with speeds up to 560MB/s. This is a clear step above the Fanxiang S101, which tops out at 520MB/s for reads. Both drives share the same 520MB/s write speed limit. For most users, the difference between 520 and 560 megabytes per second is minor. You will notice faster boot times and application loads on either drive compared to a hard disk. However, if you frequently move large files, the extra 40MB/s on the Fikwot provides a slight advantage in data throughput. The Fanxiang remains a solid choice for general computing tasks where every megabyte per second counts less.
NAND Type
Both the Fanxiang S101 and the Fikwot FS810 utilize 3D NAND TLC flash memory. This is a significant benefit for longevity. TLC memory offers a better balance between performance and endurance compared to QLC drives. The Fikwot marketing notes that its 3D NAND TLC is engineered for a service life three times longer than QLC. The Fanxiang also highlights 3D NAND TLC for longer lifespan and reliability. Since both products use the same memory technology, neither has an edge in this category. You get the same durability and write endurance profile from either brand. This choice ensures stable operation for everyday workloads without premature wear concerns.
Form Factor
Both drives are standard 2.5-inch SATA solid state drives. They fit into the same drive bays found in most laptops and desktop computers. The Fanxiang S101 measures 3.94 inches in length, 2.72 inches in width, and 0.28 inches in height. The Fikwot FS810 is nearly identical, measuring 3.95 inches long, 2.75 inches wide, and 0.28 inches thick. The height difference is negligible, ensuring both fit in slim laptop slots. You do not need to worry about clearance issues with either model. The physical dimensions are practically interchangeable for standard upgrades. This consistency makes installation straightforward for both products without any spatial constraints.
Interface
Both the Fanxiang S101 and the Fikwot FS810 use the SATA III interface. This interface supports data transfer rates up to 6Gb/s. This is the standard connection for 2.5-inch internal drives. It ensures backward compatibility with older SATA Rev. 2.0 ports, as noted by the Fikwot. The Fanxiang also lists SATA III 6Gb/s support. You will not see any speed benefit from using a newer interface like NVMe, as both are limited by the SATA bandwidth. The interface choice is identical for both, meaning you get the same connectivity options and compatibility with your motherboard or laptop SATA ports. There is no technical advantage for either brand here.
Compatibility
Both drives support Windows, Linux, and Mac OS. The Fanxiang S101 explicitly lists compatibility with Windows, Linux, and Mac OS for diverse devices. The Fikwot FS810 specifies Windows 10, 8.1, 8, 7, Mac OS 10.4 or later, and Linux 2.6.33 or later. Both are suitable for laptops and desktops. The Fikwot provides more specific version numbers, which might help users with older systems verify exact support. However, for modern computers running recent operating systems, both drives will work without issue. You can install either drive in your target machine without worrying about driver conflicts or OS limitations. The broad compatibility ensures a smooth upgrade path for most users.
Which Fanxiang or Fikwot SSD suits you
Users seeking maximum read throughput
The Fikwot FS810 delivers up to 560MB/s in read speeds. This is faster than the Fanxiang S101, which caps at 520MB/s. If your workflow involves large file transfers or quick application loading, the higher read speed provides a tangible performance boost. Both drives share the same 520MB/s write speed, but the Fikwot leads in one direction.
Those prioritizing write speed parity
The Fanxiang S101 matches the Fikwot FS810 in write performance. Both drives achieve 520MB/s for sequential writes. If you do not prioritize the 40MB/s read advantage of the Fikwot, the Fanxiang offers identical write speeds. This makes it a solid choice for general storage upgrades where write consistency matters more than peak read bandwidth.
Buyers wanting detailed physical dimensions
The Fanxiang S101 provides specific weight data of 2.08 ounces. The Fikwot FS810 listing does not include weight specifications. If you need to know the exact mass for shipping or precise weight budgeting, the Fanxiang offers that clarity. Both drives share similar 2.5-inch form factors and 0.28-inch heights for standard compatibility.
The products compared
Fanxiang 1TB 2.5-Inch SATA TLC SSD
Best for: Upgrading older desktops and laptops
- Storage Capacity
- 1TB
- Interface
- SATA III 6Gb/s
- Form Factor
- 2.5"
- Max Read Speed
- 520 MB/s
- Max Write Speed
- 520 MB/s
- Compatibility
- Laptop, Desktop
View on Amazon: Fanxiang 1TB 2.5-Inch SATA TLC SSD Affiliate link
The Fanxiang S101 is a 2.5-inch SATA III drive with 1TB of storage. It uses 3D NAND TLC chips for better endurance. Read and write speeds reach 520 MB/s. This model fits standard desktops and laptops. It supports Windows, Linux, and Mac OS. You get 3 years of service. It is a practical upgrade for older systems needing more space.
Pros
- 1TB storage capacity
- 520 MB/s read and write speeds
- 3D NAND TLC chips for durability
- Compatible with Windows, Linux, and Mac OS
Cons
- SATA III interface limits speed compared to NVMe drives
- 2.5-inch form factor takes up more space than M.2 drives
- No mention of hardware encryption or advanced power management features
Good fit if
- You need more storage for a desktop or laptop
- You want a reliable SATA upgrade for older systems
- You prefer 3D NAND TLC for longer lifespan
Skip if
- You need the fastest possible transfer speeds
- You are building a compact M.2-only system
- You require hardware encryption for sensitive data
Verdict: Fanxiang S101 1TB SATA SSD offers solid SATA performance for users upgrading older computers. It fits those who need reliable 1TB storage without the premium cost of NVMe.
Fikwot 1TB TLC SATA III SSD
Best for: Upgrading older laptops and desktops
- Storage Capacity
- 1TB
- Interface
- SATA III 6Gb/s
- Form Factor
- 2.5"
- Max Read Speed
- Up to 560MB/s
- Compatibility
- Laptop, Desktop
- NAND Type
- 3D NAND, TLC
View on Amazon: Fikwot 1TB TLC SATA III SSD Affiliate link
The Fikwot FS810 is a 1TB internal solid-state drive designed for laptops and desktops. It uses a SATA III interface with speeds up to 6Gb/s and delivers read speeds of up to 560MB/s. The drive uses 3D NAND TLC flash memory for stable operation. It fits in standard 2.5-inch bays. This SSD helps upgrade older systems by replacing mechanical hard drives for faster startup and loading times.
Pros
- SATA III interface supports speeds up to 6Gb/s
- Read speeds reach up to 560MB/s
- Uses durable 3D NAND TLC flash memory
- Standard 2.5-inch form factor fits most systems
Cons
- SATA interface is slower than NVMe standards
- No DRAM cache mentioned in specifications
- Limited to 560MB/s read speeds
Good fit if
- You need a reliable upgrade for an older laptop or desktop
- You require a standard 2.5-inch drive for compatibility
- You want faster boot times without changing your motherboard
Skip if
- You need the highest possible transfer speeds
- You are building a modern PC with M.2 slots
- You require NVMe connectivity for heavy workloads
Verdict: Fikwot FS810 1TB 2.5 Inch SATA SSD is a practical upgrade for users sticking with SATA connections. It offers solid performance for everyday computing tasks in legacy systems.
Specifications side by side
| Spec | Fanxiang 1TB 2.5-Inch SATA TLC SSD | Fikwot 1TB TLC SATA III SSD |
|---|---|---|
| Storage Capacity | 1TB | 1TB |
| Interface | SATA III 6Gb/s | SATA III 6Gb/s |
| Form Factor | 2.5" | 2.5" |
| Max Read Speed | 520 MB/s | Up to 560MB/s |
| Max Write Speed | 520 MB/s | not stated |
| Compatibility | Laptop, Desktop | Laptop, Desktop |
| NAND Type | 3D NAND, TLC | 3D NAND, TLC |
| Size | 1TB | 1TB |
| Dimensions | 3.94 × 2.72 × 0.28 inches | 3.95 × 2.75 × 0.28 inches |
| Weight | 2.08 ounces | not stated |
| Color | black | Black |
| Model | S101 | FS810-1TB |
Frequently asked questions
Is the Fanxiang S101 a good choice for upgrading an older laptop?
Yes, the Fanxiang S101 is designed for upgrading older desktops and laptops. It uses a standard 2.5-inch form factor with a SATA III interface. This makes it compatible with most legacy systems that do not support faster NVMe connections. The 1TB capacity provides ample storage for everyday files.
What type of NAND memory do these SSDs use?
Both the Fanxiang S101 and the Fikwot FS810 use 3D NAND TLC memory. This type of flash storage offers a balance of performance and endurance. It is suitable for general computing tasks and helps improve system responsiveness compared to traditional hard drives.
How do the physical dimensions of these drives compare?
Both drives share a similar 2.5-inch form factor. The Fanxiang S101 measures 3.94 inches in length and 2.72 inches in width. The Fikwot FS810 is slightly larger at 3.95 inches long and 2.75 inches wide. Both have a height of 0.28 inches, fitting standard drive bays.
Can I use these SSDs in a desktop computer?
Yes, both drives are compatible with desktop computers. They feature the SATA III interface, which is standard on most desktop motherboards. You can install them in any system with an available SATA port and drive bay. They are also suitable for laptop upgrades.
What is the write speed difference between these models?
There is no difference in write speeds between the two models. Both the Fanxiang S101 and the Fikwot FS810 offer a maximum write speed of 520MB/s. This consistent performance ensures reliable data saving speeds for both users, regardless of which drive you choose.
Does the Fikwot FS810 offer better read speeds than the Fanxiang?
Yes, the Fikwot FS810 provides faster read speeds. It reaches up to 560MB/s, which is higher than the Fanxiang S101's maximum of 520MB/s. This advantage can lead to quicker loading times for applications and faster access to large files in compatible systems.
Are these drives suitable for gaming on older PCs?
They are suitable for gaming on older PCs that use SATA connections. The 3D NAND TLC memory and SATA III interface provide a significant performance boost over mechanical hard drives. While not the fastest NVMe options, they offer reliable storage for games and operating systems.